Introduction – The Intelligent Video Surveillance (IVS) features on Dahua NVRs include functions such as Missing Object Alarm.
To set up a Missing Object Alarm on a Dahua NVR, you can follow these general steps:
Access the Web Interface:
- Open a web browser and enter the IP address of your Dahua NVR.
Login to the NVR:
- Enter your NVR’s username and password to log in.
Navigate to the Configuration Page:
- Look for a tab or section labeled “Configuration,” “Settings,” or similar.
Find the IVS (Intelligent Video Surveillance) Settings:
- Within the configuration settings, find the section related to Intelligent Video Surveillance (IVS) or Smart Event.
Select Missing Object Alarm:
- Look for the specific setting related to Missing Object Alarm. This might be labeled as “Object Abandoned,” “Object Removed,” or similar, depending on your NVR model.
Enable Missing Object Alarm:
- Enable the Missing Object Alarm function.
Configure Parameters:
- Set up the parameters for the Missing Object Alarm. This may include specifying the region to monitor and adjusting sensitivity settings.
Save and Apply Changes:
- After configuring the Missing Object Alarm settings, save and apply the changes.
Test the Missing Object Alarm:
- Conduct a test by placing an object in the monitored area and verify that the Missing Object Alarm triggers appropriately.
Additional Considerations:
- Check the user manual or documentation specific to your Dahua NVR model for detailed instructions and any additional settings.
- If you have firmware or software updates available for your NVR, consider updating to the latest version to ensure you have access to the latest features and improvements.
Remember that the exact menu names and options can vary based on the model and firmware version of your Dahua NVR. If you encounter difficulties or if specific menu items are not available, refer to the documentation that came with your NVR or contact Dahua customer support for assistance.
