Introduction – Setting up motion recording on Dahua NVR (Network Video Recorder) and DVR (Digital Video Recorder) involves configuring the system to record video footage only when motion is detected.
Below are general steps that you can follow. Please note that the specific steps may vary depending on the model and firmware version of your device.
Motion Recording Setup on Dahua NVR/DVR:
Access the Device:
- Connect your computer to the same network as your Dahua NVR/DVR.
- Open a web browser (Google Chrome, Mozilla Firefox, or Internet Explorer) and enter the IP address of your device in the address bar. The default login credentials are typically:
- Username: admin
- Password: admin
Navigate to Motion Detection Settings:
- Once logged in, find the “Setup” or “Configuration” menu.
- Look for the “Event” or “Alarm” settings.
Enable Motion Detection:
- In the Event or Alarm settings, locate the Motion Detection option.
- Enable or turn on the Motion Detection feature.
Configure Motion Detection Parameters:
- Adjust the sensitivity level: This determines how sensitive the system is to motion. You may need to fine-tune this based on your environment.
- Set up detection areas: Define specific regions within the camera’s view where motion detection should be active.
Schedule Motion Recording:
- Some systems allow you to set schedules for when motion recording is active. Configure the days and time periods when you want motion recording to be active.
Configure Recording Settings:
- In the same menu, find the Recording settings.
- Set the recording mode to “Motion Detection.”
Save and Apply:
- After making the necessary changes, click on “Save” or “Apply” to save the settings.
View Recorded Footage:
- To view the recorded footage, navigate to the Playback or Search menu.
- Specify the date and time range you want to review.
Additional Tips:
Motion Detection Sensitivity: Adjust the sensitivity level carefully to avoid false alarms caused by environmental factors like moving trees or shadows.
Notification Alerts: Some Dahua systems allow you to set up email or push notification alerts when motion is detected. Check the notification settings if you want to receive alerts.
Firmware Update: Ensure that your NVR/DVR has the latest firmware installed. Check the Dahua website for firmware updates.
Always refer to the user manual specific to your model for detailed instructions. If you encounter difficulties, Dahua’s customer support or official documentation can provide assistance.
